主营产品: ad检测试剂盒,agc试剂盒,akt试剂盒,ald检测试剂盒,ctc试剂盒,hp试剂盒,apo试剂盒,chip试剂盒,mmp试剂盒,酶联免疫,酶联免疫ELISA,酶联免疫法,elisa原理,酶联免疫试剂盒,elisa酶免试剂盒,Antibody,抗体
产品详情

Water Pump and Tank Unit "Model-PTU-3"

如果您对该产品感兴趣的话,可以
产品名称: Water Pump and Tank Unit "Model-PTU-3"
产品型号: PTU-3
产品展商: Physitemp
美元($)价格: 1100.00 元
欧元(€)价格: 0.00 元
人民币(¥)价格: 0.00 元
产品文档: 无相关文档
发布时间:2020-07-06

简单介绍

Water Pump and Tank Unit "Model-PTU-3" PTU-3


Water Pump and Tank Unit "Model-PTU-3"  的详细介绍
Water Pump and Tank Unit "Model-PTU-3"

Model-PTU-3 -Pump and Tank Unit was designed for use with Physitemp's range of thermoelectric cooling and heating stages. It provides a convenient reservoir of cooling water when a stage is operated in the cooling mode for an extended period of time in a location which has no source of tap water nearby to cool the hot side of the thermoelectric heat pump.  The reservoir tank holds seven gallons of water, which is adequate to run the smaller stages like the TS-4 series Thermal Stage or the BFS series 3 or 5 Freezing Stages for up to eight hours and a larger stage like the BFS-30 for up to four hours.
Water is circulated using a quiet 1/25 horsepower single phase motor and magnetically driven pump - so there are no rotating seals to leak or replace.  Self sealing connectors are used on the inlet and outlet water connections to prevent spillage.  Ice cubes may be added to the tank in order to extend the operating time or reduce the lowest temperature to which the thermoelectric stage can cool.  A switched accessory outlet on the read of all  thermoelectric controllers and power supplies is used to power the pump so water starts flowing immediately when the controller is turned on.  


Pump and Tank Unit PTU-3 Specifications
Dimensions:  

15:75"D x 9.5"W x 21"Hd

Weight:   18lbs (when empty)
Power Supply   110V or 220V Must be specified
Power Consumption:   150 Watts
Water Connections:   Self-sealing

Stage Specifications
Temp. Range:  

TS-4 -20 to +60 ° C
TS-4ER -20 ° to +100 ° C Temp. Controlled

Surface Area:   1.25" x 1.5"
Weight:   16 oz., including lead
Lead Length:   40 inches
Material:   Copper, nickel plated
Mounting:   Plastic. Fits slide holder

Controller Specifications
Temp. Range:  

TS-4 -20 to +60 ° C TS-4ER -20 °) to +100 ° C

Resolution::   0.1 ° C
Power Supply:   115V or 230V AC
Power Consumption:   approximately 100 Watts
Dimensions:    8" x 7" x 17"
Weight:   28 lbs.
Related Products
TS-4 Thermal Stage
BFS Freezing stage
产品留言
标题
联系人
联系电话
内容
附件:
附件支持RAR,JPG,PNG格式,大小在2M范围,只允许上传1个
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
Copyright@ 2003-2020  上海拜力生物科技有限公司  版权所有  

本公司网站所展示销售的产品仅供科研!

            

沪公网安备 31011202007337号