Emfret

德国EMFRET 公司专注心血管和血液系统研究用抗体研发和生产，供应的抗体包括清除血液中血小板，流式细胞术鉴定分析小鼠血小板表面糖蛋白，EMFRET 公司的抗体不适用于流失分析，WB检测，还可用于免疫组化/免疫荧光及免疫共沉淀检测。

emfret 中国代理, emfret 上海代理， emfret 北京代理，emfret 广东代理， emfret 江苏代理emfret 湖北代理,emfret 天津,emfret 黑龙江代理,emfret 内蒙古代理,emfret 吉林代理,emfret 福建代理,emfret 江苏代理, emfret 浙江代理, emfret 四川代理

Technical Protocols

Flow cytometric analysis of mouse platelet surface glycoproteins

          - Preparation of diluted or washed whole blood  

          - Preparation of washed mouse platelets  

          - Single-color analysis of platelet surface glycoprotein expression

          - Two-color analysis of platelet activation

Immunohistochemistry (with acetone-fixed frozen sections)

Immunoprecipitation

Immunoblot (Western Blot Analysis)

Flow cytometric analysis of mouse platelet surface glycoproteins

to top

Buffers and reagents

Tris buffered saline/Heparin (TBS/Hep): 20 mM Tris/HCl; 137 mM NaCl; pH 7.3; containing 20 U/ml Heparin.

Phosphate buffered saline (PBS): 137 mM NaCl; 2.7 mM KCl; 1.5 mM KH2PO4; 8 mM Na2HPO4; pH 7.14.

Tyrode’s Buffer (modified): 134 mM NaCl; 0.34 mM Na2HPO4; 2.9 mM KCl; 12 mM NaHCO3; 20 mM Hepes; pH 7.0; 5 mM glucose; 0.35% (w/v) bovine serum albumin

Apyrase: 10 U/ml stock in H2Obidest (stored at -20°C)

Prostacyclin (Prostaglandin 2, PGI2): 1 mM stock in H2Obidest (stored at -20°C)

CaCl2: 1 M stock in H2Obidest

to top

Preparation of diluted or washed whole blood

Take 50 µl blood with a heparinized glass capillary (e.g. ringcap) from the retro-orbital plexus into 1.5 ml tubes containing 200 µl of TBS/Heparin (20 U/ml).

Dilute in 1 ml of Tyrode´s buffer and use for flow cytometric analysis.

To prepare washed blood, centrifuge the diluted blood at 900 x g for 5 min, remove the supernatant and resuspend the pellet in 1.25 ml Tyrode´s buffer.

Add 1 mM CaCl2 directly before the start of the experiment.

Note: For thrombin-induced platelet activation, plasma has to be removed to prevent anti-thrombin activity

to top

Preparation of washed mouse platelets

The preparation of washed platelets is a more time consuming method, that requires a larger amount of blood, but yields a platelet preparation that can be used for several hours.

Collect 0.5 - 1 ml blood with 1.5 cm glass capillaries from the retro-orbital plexus into a 1.5 ml tube containing 200 µl of TBS/Heparin (20 U/ml).

Centrifuge the sample for 5 min at 500 x g and transfer the platelet rich plasma (PRP) into a new tube. For best recovery of platelets, take the complete white phase including some red blood cells.

Centrifuge the platelet suspension for 8 min at 300 x g, and transfer the PRP without any red blood cells into a new tube.

Add 0.5 µM prostacyclin (PGI2) and centrifuge at 1300 x g for 5 min.

Resuspend the platelet pellet in 1 ml Tyrode’s buffer, add 0.02 U/ml apyrase and 0.5 µM prostacyclin, incubate for 5 min at 37°C, and centrifuge for 5 min at 1300 x g.

Repeat step 5 and resuspend the platelet pellet in 0.5 ml Tyrode’s buffer, add 0.02 U/ml of apyrase and incubate for 30 min at 37°C.

to top

Single color analysis of platelet surface glycoproteins

Combine 5 µl of specific or negative control antibodies and 25 µl diluted whole or washed blood in the assay tube and vortex mix for 1-2 seconds.

Incubate for 15 min at room temperature.

Stop reaction by addition of 400 µl PBS and analyze within 30 min.

Samples were incubated with FITC-conjugated control IgG (black line), anti-GPVI, or anti-GPV as described. Platelets were gated by forward (FSC) / side scatter (SSC) characteristics. Fluorescence 1 (FL1) intensity of the gated (R1) platelets is shown in separate histograms. RBC: red blood cells.

to top

Two color analysis of platelet activation

Add 5 µl specific or negative control antibodies to the assay tube together with 5 µl of a pan-platelet marker.

At this point, any additional reagents (e.g. inhibitors) are added in small volumes (< 5 µl).

Add 26 µl diluted whole or washed blood or washed platelets (1 million) and vortex mix for 1-2 seconds.

Incubate for 15 min at room temperature. Stop reaction by addition of 400 µl PBS and analyze within 30 min.

Washed mouse platelets were incubated with PBS (resting) or thrombin (0.1 U/ml) in combination with both FITC- and PE-conjugated mAbs. Platelets were gated by expression of GPIX or GPIIbIIIa (FL1; gate 1).

to top

Immunohistochemistry (with acetone-fixed frozen sections)

Please note: It is not recommended to perform immune staining on (para-)formaldehyde-fixed samples, since most rat antibodies yield only poor results under these conditions on mouse tissues.

Mount sections from frozen tissue on slides and fix in ice cold 100% acetone for 20 min at 4°C. Dry samples over night at RT.

To minimize reagent volumes, a hydrophobic ring may be drawn with a water repellent pen around the tissue section on the slide. During all following procedures, this encircled area should not dry up. Therefore, it is recommended to perform incubation steps in a humid box.

Incubate slides in PBS for 20 min.

When using peroxidase-conjugated secondary antibodies, incubate slides with 0.03% H2O2 for 10 min at RT to inhibit endogenous peroxidase activity. Rinse slides three times in PBS for 5 min each wash.

Incubate slides for 1 hour at RT in blocking solution (serum from host species of secondary antibody to be used), diluted 1:10 or 1:100 in PBS.

Cover slides with primary antibody (2-10 µg/ml) in blocking solution and incubate for 2 h at RT.

Blot excess liquid from slides and rinse three times in PBS for 5 min each wash.

Cover slides with fluorophore- or peroxidase-conjugated secondary antibody (e.g. affinity purified donkey anti-rat IgG-FITC or -HRP, Jackson ImmunoResearch, West Grove, PA) diluted in blocking solution according to the manufacturer’s instructions. Incubate for 1 h at RT.

Blot excess liquid from slides and rinse three times in PBS for 5 min each wash.

a) Fluorescently stained samples can be directly analyzed by fluorescence microscopy.

b) For visualization of peroxidase-labeled structures, cover slides with freshly prepared 3-amino-9-ethylcarbazole (AEC) substrate and incubate until red staining is visible under the microscope, time can vary between 5 and 30 min. Stop reaction by rinsing with deionized water before orange background staining occurs. For counterstaining, incubate samples for 30-240 s with hematoxylin and rinse slides for 20 min with running warm water. Mount sections with aqueous embedding solution (e.g. Aquatex, Merck).

to top

Immunoprecipitation

Buffers and Reagents

PBS/EDTA: 137 mM NaCl, 2.7 mM KCl, 1.5 mM KH2PO4, 8.0 mM Na2HPO4 x 2 H2O, pH 7.3; 5 mM EDTA

IP buffer: 40 mM Tris/HCl, 0.3 M NaCl, 1 mM EDTA, 2 mM PMSF, 10 µg/ml Leupeptin, 10 µg/ml Aprotinin, 1 µg/ml Pepstatin

Igepal: 10% stock in H2Obidest

2x SDS-sample buffer: 10% beta-mercaptoethanol (for reducing buffer), 10% Tris buffer (1.25 M), 20% Glycerin, 4% SDS, 0.02% Bromophenolblue

Wash mouse platelets or cells (10 million per immunoprecipitation) 3 x in1 ml PBS/EDTA (5 min, 1300 x g) and resuspend in IP-buffer.

Lyse platelets by addition of 1% Igepal for 15 – 20 min at RT.

To remove cell debris, spin 5 min at 10,000 x g and transfer supernatant to a new cup.

Preclear by adding 20 µl of washed protein G agarose (PGA). Incubate with rotation for at least 3 h at 4°C.

Centrifuge the samples for 5 min at 3000 x g. Fill supernatants into new tubes, add the antibody at a concentration given in the data sheet (usually between 2 and 5 µg/ml), and after 30 min add 25 µl of washed PGA. Incubate with rotation for at least 2 h at 4°C, preferably over night.

To wash the precipitate, centrifuge the samples for 1 min at 3000 x g. Add 1 ml of 1 x IP buffer containing 1% NP-40 to the PGA pellet. Centrifuge for 1 min at 3000 x g.

Wash the PGA pellet twice in plain IP-buffer (1 min at 3000 x g).

Resuspend the PGA pellet in 25 µl of 1x SDS-sample buffer (reducing or non-reducing) and boil for 5 min. The samples can then be frozen (-20°C) for later use, or SDS-PAGE and subsequent immunoblot analysis can be performed.

to top

Immunoblot (Western Blot Analysis)

Buffers and reagents

Lysis buffer: 40 mM Tris/HCl, 0.3 M NaCl, 1 mM EDTA, 0.05% NaN3, 1% NP-40

PBS: 137 mM NaCl, 2.7 mM KCl, 1.5 mM KH2PO4, 8.0 mM Na2HPO4 x 2H2O, pH 7.3

PBS-5% milk: PBS containing 5% non-fat dry milk

PBS/T: PBS containing 0.1% Tween 20

PBS/T-1% milk: PBS/T containing 1% non-fat dry milk

All steps can be performed at room temperature:

1.     Prepare lysate of mouse platelets or cells in lysis buffer and incubate with (2x) SDS sample buffer for 5 min at 95°C.

2.     Separate proteins by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) under reducing or nonreducing conditions, as indicated in the respective data sheet, and transfer the proteins to PVDF membrane.

3.     Block the membrane with PBS-5% milk for 1 h with agitation.

4.     Incubate the membrane with 2-5 µg/ml of primary antibody in PBS/T-1% milk for 1 h with agitation.

5.     Rinse the membrane twice with PBS/T followed by two 30 min washing periods in PBS/T. Washing procedure may be reduced to three periods of 10 min each, but that should be determined individually.

6.     Incubate with secondary antibody (HRP-conjugated anti-rat Ig, e.g. from DAKO, Glostrup, Denmark, #P0162) in PBS/T-1% milk

for 45–60 min with agitation.

7.     Rinse the membrane twice with PBS/T followed by two 30 min washing periods in PBS/T.

8.     Visualize bound antibody with ECL (enhanced chemiluminiscence).

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!